SG20B

Woods Equipment SG20B

Description

Grinds stumps 28-inches above and 16-inches below ground
Hydraulic requirements: flow 12-25 gpm, pressure 2,000-3,000 psi
Telescoping head for less repositioning
24 Sandvik teeth on a 19.5-inch cutting wheel
Choose manual or electro-hydraulic controls to easily manage swing, depth and extension

Condition

New

Overall length	64.1" (1,628.1 mm)
Telescopic extension	14" (355.6 mm)
Output torque	130 - 195 lbs-ft (18-27 kg-m)
Cutting height above ground	28" (711.2 mm)
Cutting height below ground	16" (406.4 mm)
Cutting wheel width	3.52" (89.4 mm)
Working width	19.5" (495.3 mm)
Cutting wheel speed	565 - 1,180 rpm
Swing range	+/- 45°
Max. stump diameter capacity	32" (813 mm)
(without re-positioning)
Type of teeth	Sandvik
Number of teeth	24
Operating weight	800 lbs (364 kg)
Driveline	vane motor with internal relief
Hydraulic flow requirement	12 - 25 gpm (45-95 lpm)
Hydraulic pressure requirement	2,000 - 3,000 psi (138-207 bar)

Overall length

64.1" (1,628.1 mm)

Telescopic extension

14" (355.6 mm)

Output torque

130 - 195 lbs-ft (18-27 kg-m)

Cutting height above ground

28" (711.2 mm)

Cutting height below ground

16" (406.4 mm)

Cutting wheel width

3.52" (89.4 mm)

Working width

19.5" (495.3 mm)

Cutting wheel speed

565 - 1,180 rpm

Swing range

+/- 45°

Max. stump diameter capacity

32" (813 mm)

(without re-positioning)

Type of teeth

Sandvik

Number of teeth

Operating weight

800 lbs (364 kg)

Driveline

vane motor with internal relief

Hydraulic flow requirement

12 - 25 gpm (45-95 lpm)

Hydraulic pressure requirement

2,000 - 3,000 psi (138-207 bar)