TRAIL BEHIND MODEL
The tractor assisted Bale Baron 4250T trail behind model is the original concept and has remained a popular choice as a one pass system especially suited to smaller acreages. This unit is conveniently towed directly behind the baler and utilizes an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.
| Condition | New |
| Model | 4250T TRAIL BEHIND MODEL |
| Model | |
|---|---|
| Isobus Compatible | Standard |
| Greaseless Pins & Composite Bushings | Standard |
| Trails Behind Baler | Yes |
| Surge Brakes | Standard (Not available in Europe) |
| Air Brakes | Optional (In Europe, choose standard Air or Hydraulic Brakes) |
| Hydraulic Brakes | Optional (In Europe, choose standard Air or Hydraulic Brakes) |
| Bale Size: 14"x18" Bale - 21 Bale Bundle 16"x18" Bale - 18 Bale Bundle | Standard |
| Closed Center Hydraulic System | Standard |
| Load Sensing System | Standard |
| Hydraulic Oil Cooler | Standard with Power Units, otherwise N/A |
| Open Center Hydraulic System | Optional |
| Horsepower Minimum | 100 hp |
| Hydraulic Flow Minimum | 20-30 gpm (95-113 lpm) |
| Hydraulic Flow Recommended | 20 gpm (80 lpm) |
| Max Permissible Hydraulic Flow | 30 gpm (113 lpm) |
| Power Beyond with Load Sensing | Required when using Tractor Hydraulics Not required with Power Units |
| Remote SCV Required | 0 sets |
| Diesel Powered Hydraulic Power Unit | N/A |
| 30 gpm PTO Powered Unit | N/A |
| 40 gpm PTO Powered Unit | N/A |
| 3PH mounted 30 gpm PTO Power Unit | Optional |
| 3PH mounted 40 gpm PTO Power Unit | N/A |
| Base Weight | 10,500 lbs (4700 kg) |
| Capacity | 800 bales/hr @ 30 gpm (113 lpm) 600 bales/hr @ 25 gpm (95 lpm) 400 bales/hr @ 20 gpm (80 lpm) |
| Overall Length | 330" (770 cm) |
| Wheelbase Length | 125" (318 cm) |
| Rear Tandem Axle | Optional |
| Front Offset Swivel | Optional |
| Width with 15" Standard Tires | 98" (250 cm) |
| Width with 19" Wide Flotation Tires | 104" (264 cm) |
| Height (railings Collapsed) | 127" (323 cm) |
| Height (Railings Raised) | 135" (343 cm) |
ISOBUS Connectivity
The Bale Baron 4250 Series is now fully ISOBUS compatible, giving the operator full control and visibility over the bundling process, right from the cab. Watch each bundle build as every bale is tracked and counted – both in auto and manual modes – for accuracy every time. The Bale Baron will work with and without ISOBUS. If your tractor does not have an ISOBUS display, an optional display is available. The Bale Baron will also work without ISOBUS using the standard in-cab control.
Greaseless Nitrided Pins And Composite Bushings
To improve reliability and to help make servicing a Bale Baron easier, all pivot points now use greaseless and nitride treated pins as well as composite bushings.
Wider Stance
To improve the stability of the Bale Baron, the wheel base has been widened.
Large Twine Cabinets
Storage for 16 balls of twine means you can bundle more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.
Rasspe Knotter
The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.
Spring Assist Roller Ramp
Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.
Turn Table
The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.
Dual Caster Wheels
Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.
Smart Solve
The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.
Air And Hydraulic Brakes
Air brakes and hydraulic brakes are optional on all 4250 and 5250 models.
In Europe, all 4250 and 5250 models come standard with your choice of air or hydraulic brakes. A manual parking brake is also included.