(800) 659-1639

Back

H&S 2108 Action Rake

Call Now Get A Quote Schedule A Visit Value Your Trade Apply for Financing

Description

2108 ACTION RAKE

High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.

An Adjustable Hitch allows you to level the rake for efficient raking.

Right and left side raking is done easily by turning either one of the wing transport valves off.

A 49″ Center Kicker Wheel is optional on all Action Rakes.

The hitch jack is used to adjust the windrow width as shown.

Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.

The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.

OPTIONS 

A 49″ Center Kicker Wheel is optional on the 2100, and 3100 Series Rakes.

Condition New
Model 2108 Action Rake
2108
NUMBER OF RAKE WHEELS 8
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 10′
TRANSPORT LENGTH 17′
TRANSPORT HEIGHT IN TRANSPORT POSITION 86″
RAKING WIDTH 15′ - 19′
WINDROW WIDTH ADJUSTMENT 3′ - 5′
NO. OF RAKING POSITIONS W/TRANSPORT POSITION 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Adjustable Tension Spring
ACTION CYLINDER - RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 1,400#
CENTER KICKER WHEEL N/A
WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Features

  • High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
  • An Adjustable Hitch allows you to level the rake for efficient raking.
  • Right and left side raking is done easily by turning either one of the wing transport valves off.
  • A 49″ Center Kicker Wheel is optional on all Action Rakes.
  • The hitch jack is used to adjust the windrow width as shown.
  • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
  • The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.