Features
If you need a versatile, cost-efficient disc mower conditioner, the 1359 is your machine. Its seven rotary discs cut a 9-foot, 3-inch swath through grass hay, pasture or alfalfa with equal ease. The rugged, side-pull hitch easily pivots for narrow transport. Add our proven hay conditioner options to match your crop conditions, and you have the perfect machine for any small to mid-size operation.
PIVOTING SIDE-PULL TONGUE
Allows the mower to swing behind the tractor for centerline road transport.
DRIVE GEARBOX
A single gearbox drives both the cutterbar and the conditioner rolls for lower power requirements.
TANDEM FLOTATION SPRINGS
Dual springs on both sides of the 1359 allow you to fine-tune the header flotation on the ground. This allows you to better follow the terrain and get a better cut.
NEW IDEA CUTTERBAR
The New Idea cutterbar is designed with a hex shaft driving the discs through a pair of crown gears. It allows for quick disassembly, reducing operating costs. It’s also designed to absorb the shock of hitting an obstruction, reducing the risk of damage.
CONDITIONER ROLL TENSIONING
Conditioner rolls are tensioned by a spring connected to a roller chain on each side of the header, increasing efficiency and reducing wear.
The 1373 offers commercial-grade, side-pull mowing and conditioning thanks to the patented RazorEdge™ header. Modular, heavy-duty design adds durability, eliminating costly downtime. The drivetrain is designed to handle maximum loads at all times. The RazorEdge header features sealed bearings that don’t require constant lubrication, no matter the slope of the terrain.
CONDITIONER ROLL TENSIONING
Conditioner rolls are tensioned by an independent spring on each side.
EFFICIENT RAZOREDGE CUTTING POWER
The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.
HEAVY-DUTY DRIVE
A heavy-duty cast gearbox transfers power from the right angle gearbox to the conditioners.
The 1376 offers commercial-grade, side-pull mowing and conditioning thanks to the patented RazorEdge header. A modular, heavy-duty design adds durability, eliminating costly downtime. The drivetrain is designed to handle maximum loads at all times. The RazorEdge header features sealed bearings that don’t require constant lubrication, no mater the slope of the terrain.
EFFICIENT RAZOREDGE CUTTING POWER
The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.
ADJUSTABLE WINDROW FORMATION
Movable swath wings and swath board allow for precise windrow width.
CONDITIONER OPTIONS
Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).
HEAVY-DUTY DRIVE
A heavy-duty cast gearbox transfers power from the right angle gearbox to the conditioners.
CONDITIONER ROLL TENSIONING
Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.
CENTER-PIVOT TONGUE
A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.
HEADER FLOTATION
Independent springs on each side adjust ground pressure for even terrain following and clean cutoff.
Slice through tough, tangled crops at speeds that can only be attained with a rotary disc machine and the maneuverability that the Hesston by Massey Ferguson 1300 Series center-pivot models can provide. Choose the 1393 with its 13-foot cutting width or step up to the 1316 S with its 16-foot cutter bed.
EFFICIENT RAZOREDGE CUTTING POWER
The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.
CONDITIONER ROLL TENSIONING
Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.
FRONT HITCH
There are two options for attaching the mower to the tractor, a drawbar or a two-point lower link.
CONDITIONER OPTIONS
Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).
CENTER-PIVOT TONGUE
A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.
HEAVY-DUTY DRIVE
A heavy-duty cast gearbox transfers power from the right-angle gearbox to the conditioners.
HEADER FLOTATION
Dual springs on each side adjust ground pressure for even terrain following and clean cutoff.
HYDRAULIC THIRD LINK
A hydraulic third link allows the operator to easily adjust the header tilt from the cab.
ADJUSTABLE WINDROW FORMATION
Movable swath wings and swath board allow for precise windrow width.
TURBULENCE REDUCTION ROLL
The third smaller roll in-between the cutterbar and the conditioners helps minimize the air current and improves feeding from the cutterbar to the conditioners for a more consistent windrow.
Slice through tough, tangled crops at speeds that can only be attained with a rotary disc machine and the maneuverability that the Hesston by Massey Ferguson 1300 Series center-pivot models can provide. Choose the 1393 with its 13-foot cutting width or step up to the 1316 S with its 16-foot cutter bed.
EASY-ACCESS MAINTENANCE
Removable panels on each end of the header frame allow for easy access during maintenance.
IMPROVED CAGE/AUGER SETUP
Enclosed cages and high-flow augers are arranged to help move the crop over to the conditioner rolls to create a smooth and even crop mat.
EFFICIENT RAZOREDGE CUTTING POWER
The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.
CONDITIONER OPTIONS
Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).
CONDITIONER ROLL TENSIONING
Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.
HEAVY-DUTY DRIVE
A heavy-duty cast gearbox transfers power from the right-angle gearbox to the conditioners.
FRONT HITCH
There are two options for attaching the mower to the tractor, a drawbar or a two-point lower link.
CENTER-PIVOT TONGUE
A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.
TURBULENCE REDUCTION ROLL
The third smaller roll in-between the cutterbar and the conditioners helps minimize the air current and improves feeding from the cutterbar to the conditioners for a more consistent windrow.
HEADER FLOTATION
Dual springs on each side to adjust ground pressure for even terrain following and clean cutoff.
HYDRAULIC THIRD LINK
A hydraulic third link allows the operator to easily adjust the header tilt from the cab.
ADJUSTABLE WINDROW FORMATION
Movable swath wings and swath board allow for precise windrow width.
