(800) 659-1639

Back

Woods Equipment BB48.30

Call Now Get A Quote Schedule A Visit Value Your Trade Apply for Financing

Description

  • Three-point hitch: CAT 1, quick-hitch ready
  • Cuts brush up to two inches in diameter
  • Six-year limited gearbox warranty includes the seals
  • 10.5 inches deep deck, with half-inch by four-inch blades and rear baffling work together to evenly cut and distribute large amounts of material, for a superior cut quality
  • Comes standard with adjustable driveline hanger making it easier to attach
  • Greasable Quick-change blade pins are easy to maintain and remove from top of the deck through large blade access window
  • High-strength steel bumper is 2-times thicker than competitive models, with a Z-channel frame for added durability when backing over tough brush
  • NOTE: All gearbox horsepower ratings listed in the following specifications are based on Woods’ field testing.
Condition New
Model BB48.30
Tractor PTO HP 15-50
Tractor Hitch CAT 1 clevis
Cutting Height Range (in) 1 to 9
Cutting Capacity Diameter (in) 2
Cutting Width (in) 48
Blade Tip Speed (fpm) 13,000
Weight (lbs) 635 (with chain shield)
Deck Thickness (in) .105 (12 ga)
Side Frame Thickness (in) .135 (10 ga)
Side Frame Depth (in) 10.5
Transport Width (in) 55
Output Shaft Diameter (in) 1.57
Gearbox Warranty 6 year limited
Overall Length (in) 86
Deck Construction Smooth top, sloped
Gearbox HP 65 *Gearbox horsepower ratings listed are based on field testing.
Blade Dimensions (in) 1/2 x 4
Frame and Deck Support (in) 3 x 3 full-length structural tubes
Tractor PTO Speed (rpm) 540
Quick-hitch Compatible Yes
Blade Carrier Oval stump jumper
Driveline Protection Slip-clutch
Skid Shoes Full-length, replaceable
Rear Bumper Z-channel
Options Rubber belting/steel band or chain shielding; check chains

Features

  • 48-inch wide cutter for 15-50 hp tractors cuts brush up to 2 inches in diameter.
  • Quick-hitch compatibility and a drive lift hanger make it easy to attach.
  • Exclusive, greasable Quick-change pins and a large access window on top of the deck make it quick and easy to change blades.
  • Rugged bumper has Z-channel frame and is up to twice as thick as competitive models (.30 series), for added durability when backing over brush.
  • Large .5 x 4-inch blade increases suction and lifts material, resulting in excellent cut quality.
  • Smooth, sloped, clutter-free deck is easy to clean.