(800) 659-1639

Back

H&S 6120 Flex-Frame Wheel Rake

Call Now Get A Quote Schedule A Visit Value Your Trade Apply for Financing

Description

6120 FLEX-FRAME WHEEL RAKE FEATURES

H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.

The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.

The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.

A brake band on each front gauge wheels can be easily adjusted to field conditions.

Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.

A large diameter rake wheel hub is used for added strength to the rake wheel dish.

The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.

The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.

The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.

Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.

Each rake beams articulates and flexes independently.

Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.

Rake wheel wind boards are standard on the Flex-Frame Rakes.

Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.

A center kicker wheel assembly is optional.

OPTIONS

Optional 3-Wheel Center Kicker Assembly

Optional Rear Tandem Walking Beams

Optional Hydraulic Rear Windrow Adjustment.

Optional 2-Point Hitch.

Optional Hitch Extension.

Transport & Work Lights

Condition New
Model 6120 Flex-Frame Wheel Rake
6120
NUMBER OF WHEELS 20
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Ball Bearings
RAKE WHEEL ANTI-WRAP SHIELDS Standard
RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
TRANSPORT WIDTH 11′ 6″
TRANSPORT LENGTH 37′ 6″
TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
MAXIMUM RAKING WIDTH 38′ 6″
WINDROW WIDTH ADJUSTMENT 3′ TO 5′
NUMBER OF RAKING POISTIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
RAKE WHEEL WIND PANELS Standard
HYDRAULIC REAR WINDOW ADJUSTMENT Optional
HITCH JACK Standard
WEIGHT 8224#
CENTER KICKER WHEEL Optional
HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
FRONT GAUGE WHEELS 4 - 11L X 15
STANDARD SINGLE REAR TRANSPORT WHELS 2 - 11L X 15
OPTIONAL TANDEM REAR TRANSPORT WHELS 4 - 11L X 15
TRANSPORT LIGHTING Optional
WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Features

  • H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
  • The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
  • The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
  • A brake band on each front gauge wheels can be easily adjusted to field conditions.
  • Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
  • A large diameter rake wheel hub is used for added strength to the rake wheel dish.
  • The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
  • The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
  • The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
  • Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
  • Each rake beams articulates and flexes independently.
  • Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
  • Rake wheel wind boards are standard on the Flex-Frame Rakes.
  • Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
  • A center kicker wheel assembly is optional.

OPTIONS

  • Optional 3-Wheel Center Kicker Assembly
  • Optional Rear Tandem Walking Beams
  • Optional Hydraulic Rear Windrow Adjustment.
  • Optional 2-Point Hitch.
  • Optional Hitch Extension.
  • Transport & Work Lights