McFarlane Quadra-Till

Description

The McFarlane Quadra-Till is a one-pass fall tillage tool built for heavy residue and corn-on-corn acres. It sizes residue, shatters the soil profile, and levels the seedbed in a single trip across the field. Adjustable disk gangs run at 12°, 14°, or 16° with hydraulic depth control on 24 in. blades. Heavy-duty auto-reset chisel shanks trip at 1,600 lbs. of point pressure to shatter compaction. A hydraulic leveling disk system smooths ridges left behind by the shanks. A 4-bar spike tooth harrow finishes the pass for a planter-ready surface. Six models span 7 to 17 shanks, with horsepower requirements from 175 to 510. Maintenance-free bearings and walking tandem axles hold up through long, tough fall days. Optional rolling basket and 3-bar harrow configurations add finishing power for the toughest fields.

Compare Models

8’9″ QT-207 | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-207.
Working Width	8 ft. 9 in.
Number of Shanks	7.
HP Range	175-210.
Transport Width	12 ft. 8 in.
Weight	13,291 Lbs.

11’3″ QT-209 | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-209.
Working Width	11 ft. 3 in.
Number of Shanks	9.
HP Range	225-270.
Transport Width	14 ft. 7 in.
Weight	14,497 Lbs.

13’9″ QT-211 | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-211.
Working Width	13 ft. 9 in.
Number of Shanks	11.
HP Range	275-330.
Transport Width	17 ft. 3 in.
Weight	16,763 Lbs.

16’3″ QT-213F | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-213F.
Working Width	16 ft. 3 in.
Number of Shanks	13, Folding.
HP Range	325-390.
Transport Width	16 ft. 4 in.
Weight	19,089 Lbs.

18’9″ QT-215F | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-215F.
Working Width	18 ft. 9 in.
Number of Shanks	15, Folding.
HP Range	375-450.
Transport Width	16 ft. 2 in.
Weight	22,795 Lbs.

21’3″ QT-217F | Up to 12 in. Chisel Depth / 4 in. Disk Depth.

Model	QT-217F.
Working Width	21 ft. 3 in.
Number of Shanks	17, Folding.
HP Range	425-510.
Transport Width	16 ft. 2 in.
Weight	26,940 Lbs.

Condition	New
Model	Quadra-Till®

Features

One-Pass Residue Management

Sizes, Shatters, and Levels.
The Quadra-Till sizes residue, shatters the soil profile, and levels the seedbed in a single trip.

Adjustable Disk Gangs.
24 in. blades set 10 in. apart run at 12°, 14°, or 16° with hydraulic depth control.

Built to Shatter Compaction

Auto-Reset Chisel Shanks.
These 2½ in. x 1¼ in. shanks trip at 1,600 lbs. of point pressure with a 14 in. trip height.

Disk Spring System.
Coil springs protect the disk frame from rocks and stumps while holding consistent depth.

Hydraulic Leveling Disk.
Individually mounted cushion bearing standards level ridges left by the chisel shanks.

Reliable in Heavy Ground

4-Bar Spike Harrow.
This fully flexible harrow finishes the leveling pass with high-strength teeth on 11 in. spacing.

Maintenance-Free Bearings.
Triple-lip trunnion bearings on the disk, harrow, and axle shafts cut daily upkeep.

Walking Tandem Axles.
These axles keep a smooth ride and consistent depth across the width of the machine.