(800) 659-1639

Back

Kinze 412 Mach Till

Call Now Get A Quote Schedule A Visit Value Your Trade Apply for Financing

Description

THE ONLY TILLAGE TOOL NEEDED FOR SPRING & FALL

Kinze’s 412 Mach Till is designed and built for large operations with thousands of acres to cover in a very short amount of time, saving you time, energy, and money. Our 412 Mach Till is commonly used where the efficiency of a large-frame machine can be fully utilized on large parcels of land, where minimizing trips across the field is important. The low-maintenance design of the Mach Till minimizes down time and keeps it rolling through the field.

 

TRUE. BLUE. Advantage.

THE MACH TILL 3-STEP TILLAGE PROCESS
  1. Front discs loosen the soil profile and chop residue. They fracture and lift the full depth of the soil profile and then pass it right and rearward to the rear discs.
  2. Rear discs continue chopping residue and invert the soil. The discs incorporate residue throughout the soil mix and then move it left and rearward with a semi-level finish.
  3. Rear rubber furrow roller consolidates, smooths, and finishes the soil mix and completes the leveling process. Top residue and soil are firmed together to control wind and water erosion.

 

Condition New
Model 412 Mach Till

CONFIGURATIONS

  • WIDTH 41′ | TRANSPORT WIDTH 16′

KEY BENEFITS

  • Independently mounted discs have 11½” of clearance to enable discs to clear rocks and other obstacles while following land contours
  • Four robust rubber spring elements pre-load the disc arms and keep discs firmly engaged with the soil
  • Heavy-built frame provides the weight necessary for working in all soil conditions and is supported by four high-flotation tires
  • Consistent working depth is maintained by distributing the frame weight wing-to-wing by the pressure compensated hydraulic weight distribution system
  • The full width rubber furrow roller provides optimum, non-compacting soil and residue firming in various soil conditions
  • Both the concave smooth and double-V discs are shallow-faced to provide an aggressive cutting edge while eliminating soil compaction layers
  • Discs are spaced 10″ apart to enhance residue flow and eliminate plugging
  • Maintenance-free double-sealed bearings, carbide roller scrapers, composite bushings, and oversized pins throughout provide many acres of low maintenance operation
  • Tills an average of 50 acres per hour at 10 mph using a 620+ HP tractor operating at 80% field efficiency

Features

FEATURES & OPTIONS

  • Category 5 articulating hitch
  • Tungsten carbide scrapers
  • Hydraulic weight distribution
  • 3-Section heavy built frame
  • OTICO furrow rollers
  • Independent disc arms
  • Mechanical depth control
  • Hydraulic jack
  • Transport width of 16′-0″
  • 20″ or 22″ smooth and double-V discs