Description
The DewPoint 6210 Hay Steamer generates steam which is used in the baling process. In many areas of the world, farmers struggle to get natural dew, which makes it hard to produce quality hay. Often, farmers are forced to bale dry hay, which will shatter the leaves. Baling hay too dry results in leaf loss, poor appearance, and ultimately lower value.
For decades farmers have dealt with the age-old problem of too little dew. Some farmers try and bale with stem moisture to compensate for their lack of dew, while others have tried spraying water on hay prior to baling. Baling with stem moisture can be risky and spraying water on cured hay requires more equipment and labor. Not to mention the fact that water doesn’t absorb into hay the way that steam does.
Steam is an extremely effective moisture medium for controlled hydration of hay during the baling process. Farmers using steam will realize greater leaf retention and bale weight, more consistency, and more control over their operation. Steam enables commercial hay growers to bale hay anytime the crop is sufficiently dry, without the need to wait for natural dew.
Bale Moisture is monitored continuously and adjustments to the steam injection rate are made by the machine operator as needed to maintain optimum bale moisture conditions at all times.
| Condition | New |
| Model | DEWPOINT 6210 |
