Staheli West DewPoint 632

58% Less Leaf Loss Than Natural Dew
The DewPoint 632 generates steam to raise moisture content in dry hay, reducing leaf loss by over 58 percent compared to baling with natural dew.

5 to 10% Heavier Bales
Steaming hay before baling delivers an average bale weight increase of 5 to 10 percent.

Prevents Nutrient Loss & Reduces Dust
Steam minimizes dust and nutrient loss during baling, improving hay palatability and quality.

Extends Your Harvest Window
Bale on your schedule instead of waiting on natural dew, extending harvest cycles for higher yields.

380-Gallon Boiler Water Capacity
A 380-gallon boiler water supply keeps steam production consistent through long baling runs.

Hydraulic-Powered Diesel Burner
A hydraulic-powered diesel burner drives the boiler, generating the steam that treats your hay.

Four Steam Distribution Manifolds
Four steam distribution manifolds mounted on the baler apply steam evenly as hay is picked up and formed.

Approximately 20% Longer Run Times
The DewPoint 632 delivers roughly 20 percent longer run times compared to previous DewPoint models.

250-Gallon Diesel Tank, 7.5 to 15-Hour Runtime
A 250-gallon diesel tank powers the burner for 7.5 to 15 hours per fill, depending on operating conditions.

1,175-Gallon Supply Water Capacity
A 1,175-gallon supply water tank keeps steam production going for 3.5 to 7 hours between refills.

Fewer Stops, More Baling Time
Large fuel and water capacities mean fewer stops to refill during long baling days.

Easier Service & Maintenance
The 632 is designed for easier service and maintenance than previous DewPoint models.

200 to 275 HP Minimum
The DewPoint 632 runs off your towing tractor, requiring a minimum of 200 to 275 horsepower depending on slope.

240 to 300+ HP Recommended
For best performance, Staheli West recommends 240 to 300-plus horsepower, varying with terrain.

Closed Center Hydraulics, 15 GPM Minimum
A closed center hydraulic system with a 15 GPM minimum flow and 3/8-inch case drain powers the unit.

12-Volt Auxiliary Port Required
A single 12-volt auxiliary port on the tractor is all that’s needed to run the electrical system.

Four Cameras, One View
A four-camera system gives the operator full visibility around the machine without leaving the cab.

Monitor Steam Application on the Go
Keep an eye on steam distribution and baler operation in real time as you work.

Safer Operation Around the Machine
Improved visibility helps operators spot issues early and work safely around a large, heavy unit.

Built for Long Days in the Cab
Camera visibility reduces the need to stop and inspect the machine manually during long baling runs.

The All-New DewPoint Machine
The DewPoint 632 is Staheli West’s cutting-edge hay steamer purpose-built for large square balers.

16,080 Lbs. Dry, 30,355 Lbs. Loaded
At 16,080 pounds dry and up to 30,355 pounds fully loaded, the 632 is built to handle a full day of steaming without stopping.

128 x 220 x 130-Inch Footprint
A 128-inch wide, 220-inch long, 130-inch tall footprint tows behind your baler without getting in the way.

Greater Efficiency Than Ever
Longer run times and easier maintenance make the 632 more efficient to own and operate than previous DewPoint models.

Backed by Parallel Ag’s Parts & Service Team
Parallel Ag’s expert parts and service team is here to keep your DewPoint 632 running at peak performance — with knowledgeable staff across all our locations ready to support you throughout hay season.

Genuine Staheli West Parts
Staheli West replacement parts are made to the same high standards as those used on the assembly line. Talk to your local Parallel Ag parts team to get the genuine parts you need, fast.

Tractor Compatibility Guidance
Parallel Ag’s team can help you confirm your tractor meets the horsepower and hydraulic requirements before you buy.

Financing Available
Talk to Parallel Ag about financing options to get your new DewPoint 632 working for you.