Gleaner S9 SUPER SERIES COMBINES

Three Models, 322 to 430 Rated HP
Choose the S96, S97, or S98 to match harvesting capacity to your acres, with max boost power up to 471 hp when you need it.

360° Transverse Rotor Separation
A compact 360-degree threshing and separating design packs more separating surface area into a smaller footprint than competing designs.

Power Where It Counts
Less horsepower devoted to moving a heavy combine means more horsepower directed to the processor — clean grain with minimal loss.

Resists Slope Sensitivity
The mid-air Gleaner cleaning design resists the effect of gravity on slopes of 23% or more, keeping cleaning performance consistent on rolling ground.

Straight-Line Crop Flow
Crop material flows straight into the combine and straight into and around the rotor, allowing smooth and consistent threshing with minimal redirection.

30-Inch Transverse Rotor
A 30-inch-diameter, 88-inch-long transverse rotor with chrome, reversible high-profile bars delivers consistent threshing across all three models.

Rarely Requires Concave Changes
The pre-cleaning design rarely requires changing concaves, cutting down on setup time between crops and conditions.

69-Inch Feeder House
A 69-inch-long by 39.5-inch-wide feeder house with an 8.625-inch front feed drum and electro-hydraulic feed reverser reduces plugs.

Two-Stage Cleaning Process
Distribution augers and accelerator rolls thin the crop mat and propel it at four times the speed of free fall, before the cleaning shoe’s lower-duct air stream finishes the job.

8,721 in² of Total Cleaning Area
A 992 in² perforated cascade pan, 3,889 in² chaffer, and 3,397 in² sieve combine for 8,721 in² of total cleaning area on every model.

DirectFlow Two-Auger Unloading
A 12-inch grain bin cross auger and 14-inch swivel unloader auger run straight through — no 90-degree turns like competitive systems — for a 4 bu/sec average unloading rate.

390-Bushel Grain Tank
Every model shares a 390-bushel (13,743L) grain tank, reaching 298 inches from centerline at unload.

15% More Volume Than Comfortech
The Vision cab offers 130 ft³ of interior volume — 15 percent more than the Comfortech cab it replaces — with 66 ft² of total glass area.

22% More Front Glass
Front glass area increases 22 percent to 32.9 ft², putting more of the header and crop ahead of you in clear view.

Power Swivel Ladder
The power swivel ladder swings toward the front of the combine for transport, and 12 high-lumen cab lights light up night harvesting.

Premium Audio & Bluetooth
A standard four-speaker radio steps up to four Kicker speakers and a subwoofer, with Bluetooth hands-free calling and audio streaming.

Four-Quadrant Tyton Terminal
Easy-to-read, Gleaner-specific graphics on a four-quadrant display put automated shaft-speed calibrations and fan, concave, chaffer/sieve, and header settings within reach.

Standard Live Yield Mapping
FieldStar Live yield and moisture sensors deliver live mapping data through the Tyton terminal standard, with Ag Leader compatibility available.

Standard AGCO Auto-Guide
A standard NovAtel receiver with factory WAAS setup delivers Auto-Guide satellite guidance out of the box, with Trimble available as an option.

One-Button Automatic Header Height Control
A single button activates Automatic Header Height Control, and armrest-actuated grain tank open/close keeps your hands on the controls.

SmartCooling Variable-Pitch Fan
The variable-pitch cooling fan automatically adjusts pitch to deliver only the cooling required, and reverses pitch briefly every 15 minutes to keep the radiator clean.

2-Speed FineCut II Chopper
A 2-speed, 24-knife FineCut II chopper spinning up to 3,250 RPM pairs with hydraulic, variable-speed straw and dual chaff spreaders for even residue distribution.

Industry’s Largest Walk-In Engine Compartment
The walk-in rear-engine compartment is the industry’s largest, with most parts within easy reach from the ground.

Straight-Through Shafts for Ground-Level Service
Straight-through shafts, accessible suction-type hydraulic filters, and a pivoting rotary screen box let you service the machine with both feet on the ground.

Backed by Parallel Ag’s Parts & Service Team
Parallel Ag’s expert parts and service team is here to keep your Gleaner S9 Super Series combine running at peak performance — with knowledgeable staff across all our locations ready to support you throughout harvest.

GleanerGuard™ Warranty
Nonconsumable parts found defective in workmanship or material are covered for two years from date of delivery, with optional one- or two-year extended coverage available.

Genuine AGCO Parts
The complete AGCO Parts network keeps genuine, high-quality replacement parts on hand through your local Parallel Ag parts team.

AGCO Finance Available
Flexible AGCO Finance programs, including seasonal payments, skip payments, and waiver periods, help you get your S9 working for you.