Description
The STIHL HT 250 is the top-of-line fixed-shaft gas pole pruner in STIHL’s lineup, built around a 40.2cc engine delivering 2.1 bhp — the most power and displacement of any model in STIHL’s current pole pruner comparison chart. It runs a low-kickback Picco Micro Mini 3 chain on a 10″, 12″, or 14″ guide bar, with fully automatic, speed-controlled chain oiling. An anti-vibration system and multi-function control handle keep it steady and comfortable through extended overhead cutting, while a choke knob with dedicated cold/warm-start positions and a manual fuel pump make for easier starts.
Compare Models
Two models to choose from. Click any model below to see full specs.
HT 250 | 13.9 lbs. | 2.1 bhp
| Model |
STIHL HT 250 |
| Power Source |
Gas |
| Shaft Type |
Fixed Drive Tube |
| Engine Displacement |
2.45 cu. in. (40.2 cc) |
| Engine Power |
2.1 bhp (1.6 kW) at 9,000 RPM |
| Fuel Capacity |
21.6 fl. oz. (0.64 L) |
| Chain Oil Capacity |
7.4 fl. oz. (0.22 L) |
| Weight (dry, without cutting attachment) |
13.9 lbs. (6.3 kg) |
| Guide Bar Length |
10″, 12″, or 14″ (25, 30, or 35 cm) |
| Chain Type |
Low-Kickback STIHL Picco Micro Mini 3 (61 PMM3), 3/8″ Pitch |
HT 134 | 13.2 lbs. | 1.90 bhp
| Model |
STIHL HT 134 |
| Power Source |
Gas |
| Shaft Type |
Fixed Drive Tube |
| Engine Displacement |
2.2 cu. in. |
| Engine Power |
1.90 bhp (1.40 kW) |
| Fuel Capacity |
Not provided by manufacturer |
| Chain Oil Capacity |
Not provided by manufacturer |
| Weight (without fuel) |
13.2 lbs. |
| Guide Bar Length |
14″ (35 cm) |
| Chain Type |
Not provided by manufacturer |
