(800) 659-1639

Dalton DW7240 – 4400168

Call Now Get A Quote Schedule A Visit Value Your Trade Apply for Financing

Description

The Dalton DW C/S Split Series applies anhydrous ammonia across tough ground with ease. Engineers built this coulter/shank bar for long hours and high application rates. Choose from three classes, covering 11 to 23 rows and working widths up to 57.5 feet. Greaseless pivot points and bolt-in spindles keep maintenance low. A heavy-duty 6×6 frame and self-leveling rear hitch add strength and stability in the field.

Compare Models

Three classes to choose from. Click any class below to see full specs.

DW Class 1 | 11–14 Rows | Up to 35 ft
Model Dalton DW Class 1
Rows 11 to 14
Row Spacing 30 in (standard)
Custom Row Spacing Optional
Working Width Up to 35 ft
Center Section Width 13 ft
Degree of Downflex 20°
Frame Tubing 6 in x 6 in
Rank 72 in
Heavy-Duty Pin-On Adjustable Tongue 6 in x 6 in
Hitch CAT4 Bull Pull
Telescoping/Swinging HD Rear Hitch Standard
Wing Sections 3 Sections
Quick Coupler Stand Standard
Tires 320/70 R15
Axles – Lift & Gauge Wheels Walker
Hydraulic Outboard Gauge Wheels N/A
Greaseless Primary Pivot Points Standard
Hydraulic Hose & Gauge Stand Standard
Light Kit Standard
HP Requirement (Typical) 165–280
2-Year Main Frame Warranty Standard
Single Point Depth Control Standard
DW Class 2 | 15–18 Rows | Up to 45 ft
Model Dalton DW Class 2
Rows 15 to 18
Row Spacing 30 in (standard)
Custom Row Spacing Optional
Working Width Up to 45 ft
Center Section Width 13 ft, 14 ft, or 15.5 ft
Degree of Downflex 20°
Frame Tubing 6 in x 6 in
Rank 72 in
Heavy-Duty Pin-On Adjustable Tongue 6 in x 6 in
Hitch CAT4 Bull Pull
Telescoping/Swinging HD Rear Hitch Standard
Wing Sections 3 or 5 Sections
Quick Coupler Stand Standard
Tires 320/70 R15
Axles – Lift & Gauge Wheels Walker
Hydraulic Outboard Gauge Wheels Hydraulic
Greaseless Primary Pivot Points Standard
Hydraulic Hose & Gauge Stand Standard
Light Kit Standard
HP Requirement (Typical) 225–360
2-Year Main Frame Warranty Standard
Single Point Depth Control Standard
DW Class 3 | 19–23 Rows | Up to 57.5 ft
Model Dalton DW Class 3
Rows 19 to 23
Row Spacing 30 in (standard)
Custom Row Spacing Optional
Working Width 57.5 ft
Center Section Width 15.5 ft or 16 ft
Degree of Downflex 20°
Frame Tubing 6 in x 6 in
Rank 72 in
Heavy-Duty Pin-On Adjustable Tongue 6 in x 6 in
Hitch CAT4 Bull Pull
Telescoping/Swinging HD Rear Hitch Standard
Wing Sections 5 Sections
Quick Coupler Stand Standard
Tires 320/70 R15
Axles – Lift & Gauge Wheels Walker
Hydraulic Outboard Gauge Wheels Hydraulic
Greaseless Primary Pivot Points Standard
Hydraulic Hose & Gauge Stand Standard
Light Kit Standard
HP Requirement (Typical) 285–460
2-Year Main Frame Warranty Standard
Single Point Depth Control Standard
Condition New

Features

Row Unit Performance

Sonic Coulter
A sonic coulter opens a clean, consistent slot ahead of each row unit for reliable ammonia sealing.

Bolt-In Spindles on Walkers
Bolt-in spindles make walker maintenance and replacement quick and simple.

Single-Point Depth Control
One control adjusts working depth across the entire bar for fast, even setup.

Built to Last

Heavy-Duty Frame
6-inch by 6-inch frame tubing stands up to tough ground and long hours in the field.

Industry-Leading Down-Flex Wings
Wings flex 20 degrees to follow ground contours, keeping depth consistent across the full width.

Heavy-Duty Pin-On Adjustable Tongue
A heavy-duty, pin-on tongue adjusts to fit your towing setup.

Low-Maintenance Design

Greaseless Primary Pivot Points
Greaseless pivot points cut maintenance and extend service life.

Self-Leveling Rear Hitch
The self-leveling rear hitch keeps trailing equipment steady and level during application.

24-Month Limited Warranty
A 24-month limited warranty backs the main frame for lasting peace of mind.

Configuration & Options

Versatile Row Spacing
Custom row spacing options let you configure the bar to fit your operation.

Clamp & Sealer Options
Choose from various disc sealer, coulter, knife, and shank clamp options to match your application.

Continental NH3 System (Optional Add-On)
Add the Continental NH3 System to customize your Dalton DW C/S Split Series for precise application control.