6219 7-4 & Twin Auger

Description

6200 SERIES FORAGE BOX

Features common to all models:
The 6200 Series Forage Boxes are front & rear unload only.
Available in either HD 7-4 (cross conveyor), or HD Twin Auger front unload systems w/hydraulic front unload drive as standard, and PTO drive front unload as optional.
2″ Apron Drive Shaft.
Faster unload time and the smoothest unloading system on the market.
New swept back unit design.
H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.
Beater shafts are 1¼″ & equipped with greaseable bearings and are mounted in the head, not auxiliary panels in the box.
Easy install 4th beater w/knock-out lugs.
A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity.
A separate clutch allows you to start and clear the cross conveyor or augers before you start the beaters or main apron conveyors.
6200 Series Forage Box frames feature heavy 5″ channel cross members and 2.5″ x 2.5″ side stakes.
On the rear unload system, once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.
The Rear Unload Drive System features a quick change pin.
7+4 Models – Standard Spring Assist 24″ Cross Conveyor Extension has the ability to tip DOWNWARD 22 degrees.
Spring Loaded Tighteners on Beaters.
Remote grease zerks for the beater bearings.

6200 Series Forage Box Options

540 RPM PTO/Standard Length in-lieu-of Hydraulic Drive
540 RPM PTO/Long in-lieu-of Hydraulic Drive (For use w/Tractor Quick Hitches)
4th Beater Kit
2’ Extension Hydraulic Cylinder Kit (1) Remote Needed – Hoses Included
Roof for 19’ & 21’ Models
Electric Cab Control for Front Unload Speed Adjustment
Roof Hood for all models
42” Running Gear Conversion Kit

ConditionUsed
Model6219 7-4 & Twin Auger
6219 7-4 & TWIN AUGER
Inside Width88.25″
Inside Height (floor to top of side)86″
Inside Length19′
Overall Width112″
Overall Length24′ 3″
Box Side Height106″
Overall Height @ Top Door Pivot122″
Cubic Ft. Cap. – No Roof/Struck986.30 cu. ft.
Apron Chain667X
Cross-Conveyor – HD 7-422″ WIDE – CA550 CHAIN WITH WELDED SLATS
Beaters3 – 18″ – 4 BAR SPIRAL
Main Apron SpeedVARIABLE SPEED DRIVE — 12 UNLOAD SPEEDS
Front Drive SystemBRONZE WORM GEAR BOX — #80 ROLLER CHAIN — 2″ MAIN APRON DRIVE SHAFT
DriveHYDRAULIC DRIVE STANDARD/540 PTO OPTIONAL
Emergency Stop ClutchSTANDARD
Rear Unload DriveHYDRAULIC
Rear Unload SpeedUNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M.
Rear EndgateAUTOMATIC LOCK AND UNLOCK
Rear Gate DelaySTANDARD
RoofOPTIONAL

Locations

View All Locations

Powered by VSG Marketing