5221 Twin Auger

Description

5200 SERIES FORAGE BOX

Features common to all models:

The 5200 Series Forage Boxes are front unload only.
Available in either HD 7-4 (cross conveyor), or HD Twin Auger front unload systems.
PTO front unload drive as standard, and hydraulic drive front unload as optional.
Faster unload time and the smoothest unloading system on the market
New swept back unit design
H&S uses (3) – 18″ 4 Bar Heavy Duty spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.
Beater shafts are 1¼″ & equipped with greaseable bearings and are mounted in the head, not auxiliary panels in the box.
Full length side screen venting
Easy install 4th beater w/knock-out lugs
A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity.
A separate clutch allows you to start and clear the cross conveyor or augers before you start the beaters or main apron conveyors.
Heavy 10″ frame stringers
5” – 6 Gauge Steel Channel Cross-Frame Members
2.5″ x 2.5″ tube uprights
2″ Apron Drive Shaft
7+4 Models – Standard Spring Assist 24″ Cross Conveyor Extension has the ability to tip DOWNWARD 22 degrees
Spring loaded tighteners for the beater drive chains
Remote grease zerks for the beater bearings
All models feature a Removable Roof/No Roof Option

ConditionNew
Model5221 Twin Auger
5221 Twin Auger & 7-4 Specifications
  • Inside Width . . . . . . . . . . . . . . . . . . . . . 88.25″
  • Inside Height (floor to roof center) .  99″
  • Inside Length . . . . . . . . . . . . . . . . . . . . 21′
  • Overall Width . . . . . . . . . . . . . . . . . . . . 112″
  • Overall Length . . . . . . . . . . . . . . . . . . .  24′ 8″
  • Overall Height . . . . . . . . . . . . . . . . . . .  120″
  • Cubic Ft. Cap. – No Roof/Struck . . . . . 1,067.98 cu. ft.
  • Apron Chain . . . . . . . . . . . . . . . . . . . . .  667X
  • HD 7-4 Cross-Conveyor . . . . . . . . . .  .  22″ Wide – CA550 Chain w/Welded Slats
  • HD 7-4 Cross-Conveyor Extension . .  24” Spring Assist/Hydraulic Extend/Retract is optional
  • Twin Auger Discharge . . . . . . . . . . . . . (2) 10″ High Speed Cross Augers w/Poly-Lined Auger Troughs & 11″ Slide-Out Extension
  • Beaters . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 18″ – 4 Bar Spiral
  • Main Apron Speed . . . . . . . . . . . . . . . .  Variable Speed Drive — 12 Unload Speeds
  • Drive System . . . . . . . . . . . . . . . . . . . . . Bronze Worm Gear Box — #80 Roller Chain
  • Main Apron Drive Shaft . . . . . . . . . . .  2″
  • Drive . . . . . . . . . . . . . . . . . . . . . . . . . . .  540 PTO is Standard/Hydraulic Drive is optional – (1) Remote Needed
  • Emergency Stop Clutch . . . . . . . . . . . . Standard
  • Main Stringers . . . . . . . . . . . . . . . . . . .  10” – 7 Gauge Channel set on 42” Spacing
  • Box Uprights . . . . . . . . . . . . . . . . . . . . . 2.5” x 2.5” Tubular Steel
  • Box Sides & Rear . . . . . . . . . . . . . . . . .  Aluminized
  • Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Removable Roof is Standard w/No Roof option available
  • Highway Lighting & Power Cord . . . . Standard
  • Running Gear Hold-Down Kit . . . . . .  Standard

Features

Features common to all models:

  • The 5200 Series Forage Boxes are front unload only.
  • Available in either HD 7-4 (cross conveyor), or HD Twin Auger front unload systems.
  • PTO front unload drive as standard, and hydraulic drive front unload as optional.
  • Faster unload time and the smoothest unloading system on the market
  • New swept back unit design
  • H&S uses (3) – 18″ 4 Bar Heavy Duty spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.
  • Beater shafts are 1¼″ & equipped with greaseable bearings and are mounted in the head, not auxiliary panels in the box.
  • Full length side screen venting
  • Easy install 4th beater w/knock-out lugs
  • A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity.
  • A separate clutch allows you to start and clear the cross conveyor or augers before you start the beaters or main apron conveyors.
  • Heavy 10″ frame stringers
  • 5” – 6 Gauge Steel Channel Cross-Frame Members
  • 2.5″ x 2.5″ tube uprights
  • 2″ Apron Drive Shaft
  • 7+4 Models – Standard Spring Assist 24″ Cross Conveyor Extension has the ability to tip DOWNWARD 22 degrees
  • Spring loaded tighteners for the beater drive chains
  • Remote grease zerks for the beater bearings
  • All models feature a Removable Roof/No Roof Option

Our Locations

View All Locations