Gleaner 3300 COMMAND SERIES CORN HEADS

High Capacity, Faster Harvesting Rates
The 3300 Command Series delivers faster speed, less loss, less trash ingestion, and more functions than corn heads that came before it.

Four Configurations, 8 or 12 Rows
Choose the 3308 or 3312 in chopping or non-chopping versions to match your combine class and residue management needs.

Built for Difficult Harvest Conditions
Reduced header loss, even in downed corn, keeps more grain in the tank when field conditions turn against you.

Matched to Combine Classes 6 Through 8
Recommended combine class ranges from 6-8 on the 3308/3308C to 7-8 on the 3312/3312C, so the head is sized right for your combine.

20-Inch Large-Diameter Auger
A large 20-inch auger reaches over the gatherer and row unit, allowing slower auger rotation with faster crop movement for a smoother transition into the head.

Low-Density Polyethylene Snouts & Gatherers
Impact-absorbing polyethylene snouts and gatherers reduce ear bounce, keeping more grain headed for the tank instead of the ground.

Stalk Rolls With Point-to-Point Contact
Optimized stalk roll design with point-to-point contact improves feeding consistency across varying stalk conditions.

Precise Synchronization at Higher Speeds
Precise timing between components enables greater performance at higher ground speeds without sacrificing feeding quality.

Hydraulic Fore-Aft Header Tilt
Cab-adjustable hydraulic fore-aft tilt (±6°) with an accumulator system lets the head float and follow ground contours, cutting losses in tough conditions.

Cove-Shaped Snout Design
Cove-shaped snouts reach under lodged ears without knocking them loose, recovering more grain from down corn.

Minimized Gaps at the Gatherer & Row Unit
Tight tolerances between the gatherer and row unit reduce the gaps where kernels and ears can be lost.

Optional Snout Skids
Optional snout skids provide smooth flotation across uneven ground, protecting the head while keeping it running low.

Chopping or Non-Chopping, Your Choice
Choose the standard non-chopping 3308 or 3312, or step up to the 3308C or 3312C for integrated stalk chopping.

Standard Header Hood
A standard header hood keeps debris from escaping over the opening, keeping the cab and cooling package cleaner.

#627 Gathering Chain Strips Less Leaves
The #627 gathering chain design strips fewer leaves as it feeds the stalk, cutting down on trash reaching the combine.

Optional Stalk Crushers
Optional stalk crushers knock down standing stubble to reduce tire hazards on the next pass across the field.

Electric Deck Plate Adjustment
Electrically adjustable deck plates let you fine-tune spacing on the go without leaving the cab.

Slanted Deck Design
A slanted deck design decreases butt shelling and kernel loss as ears move through the head.

30-Inch Row Spacing Across the Lineup
Standard 30-inch row spacing keeps setup and parts consistent whether you’re running the 8-row or 12-row head.

Built for Consistent Field-to-Field Performance
Adjustability across deck plates, tilt, and auger keeps performance consistent as field and crop conditions change through the season.

Headsight Auto Height Sensor Ready
Factory prewiring makes adding Headsight auto height sensors straightforward, for responsive header height control.

Reichhardt Row Guidance Compatible
Built-in compatibility with Reichhardt row sensing means no modification is needed to add automated row guidance.

Easy Technology Integration
The head is engineered from the factory for easy addition of height sensing and row guidance technology as your operation grows.

Built for the Modern Combine Cab
Technology-ready wiring keeps the head compatible with the precision ag tools you’re already running in the cab.

Backed by Parallel Ag’s Parts & Service Team
Parallel Ag’s expert parts and service team is here to keep your 3300 Command Series corn head running at peak performance — with knowledgeable staff across all our locations ready to support you throughout harvest.

Genuine AGCO Parts
AGCO replacement parts are made to the same high standards as those used on the assembly line. Talk to your local Parallel Ag parts team to get the genuine parts you need, fast.

Pre-Season Setup & Support
Parallel Ag’s team can help you get your 3300 Command Series head set up, adjusted, and ready before the first day of harvest.

Financing Available
Talk to Parallel Ag about financing options to get your new corn head working for you this harvest.