3110 Action Rake

Description

3110 Action Rake

High Clearance Action Rakes features a “KWIK PIK” (patented) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.

An Adjustable Hitch allows you to level the rake for efficient raking.

Right and left side raking is done easily by turning either one of the wing transport valves off.

A 49″ Center Kicker Wheel is optional on all Action Rakes.

The hitch jack is used to adjust the windrow width as shown.

Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.

The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single hand crank.

OPTIONS

A 49″ Center Kicker Wheel is optional on the 2100, and 3100 Series Rakes.

ConditionNew
Model3110 Action Rake
3110
NUMBER OF WHEELS10
WHEEL DIAMETER60″
TEETH PER WHEEL40
TOOTH DIAMETER7.5mm
RAKE WHEEL HUBSTapered Bearings
TRANSPORT WIDTH10′ 8″
TRANSPORT LENGTH21′
TRANSPORT HEIGHT IN TRANSPORT POSITION101″
RAKING WIDTH18′ – 22′
WINDROW WIDTH ADJUSTMENT3′ – 6′
NO. OF RAKING POSITIONS10
GROUND PRESSURE RAKE WHEEL ADJUSTMENTIndependent wheel flotation with single side adjustment crank
ACTION CYLINDER – RAISE/LOWER4 ½″
WING CYLINDERS2″
JACKStandard
WEIGHT2,000#
CENTER KICKER WHEELOptional
TRANSPORT WHEELS(2) – ST205/75D15
ADJUSTABLE BALL HITCHOptional

Locations

View All Locations

Powered by VSG Marketing