Kinze 1521 Dual-Auger Grain Cart

Description

The Kinze 1521 dual auger grain cart adapts to your undercarriage preference: tracks or flotation tires. Tracked units hold 1,500 bushels, while tire-equipped units carry 1,450 bushels. Both configurations unload at speeds up to 750 bushels per minute. A clean corner auger design keeps the combine spout in clear view at all times. One joystick handles auger tilt, spout tip, horizontal auger, and flow gate together. Dedicated 36-inch by 108-inch tracks spread weight for reduced soil compaction. Fields harvested with tracked carts see a 4.4% yield increase over tire-equipped carts.

Compare Models

Two undercarriage configurations to choose from. Click any model below to see full specs.

1521 – Tracks | 1,500 Bu. | 16 PSI Ground Contact

Model	1521 – Tracks.
Heaped Capacity	1,500 Bu.
Undercarriage	36″ x 108″ Dedicated High-Flotation Tracks (Standard) / 36″ x 100″ Camso Tracks (Optional).
Ground Contact Pressure	16 PSI.
Condition	New.
Type	Corner Dual Auger Grain Cart.
Unload Speed (Maximum)	750 Bu./Min.
Vertical Auger	22″ Diameter Flighting, 24″ Diameter Tube.
Horizontal Auger	20″ Diameter Flighting, 22″ Diameter Tube.
Gearbox	Bevel & Spur Gears (2:1 Ratio).
Drive Belts	Two 4-Band Multi-Strand V-Belts.
PTO	1-3/4″ Diameter, 20 Spline, 1000 RPM.
Scale Package	5-Point (Standard).
Tarp	Manual (Standard) or Electric (Optional).
Tractor Horsepower (Minimum)	370 HP.
Tractor Hydraulics (Minimum)	2 SCVs; 2,320 System PSI.
Warranty	2-Year Limited (Industry Exclusive).
Width (Overall)	13’0″.
Length (Overall)	39’3″.
Height (Overall)	12’5″.
Weight (Empty)	31,680 Lbs.
Hitch Weight (Empty)	4,040 Lbs.
Hitch Weight (Loaded)	6,600 Lbs.

1521 – Flotation Tires | 1,450 Bu. | 24 PSI Ground Contact

Model	1521 – Flotation Tires.
Heaped Capacity	1,450 Bu.
Undercarriage	Flotation Tires (1250/50R32 CFO).
Ground Contact Pressure	24 PSI.
Condition	New.
Type	Corner Dual Auger Grain Cart.
Unload Speed (Maximum)	750 Bu./Min.
Vertical Auger	22″ Diameter Flighting, 24″ Diameter Tube.
Horizontal Auger	20″ Diameter Flighting, 22″ Diameter Tube.
Gearbox	Bevel & Spur Gears (2:1 Ratio).
Drive Belts	Two 4-Band Multi-Strand V-Belts.
PTO	1-3/4″ Diameter, 20 Spline, 1000 RPM.
Scale Package	5-Point (Standard).
Tarp	Manual (Standard) or Electric (Optional).
Tractor Horsepower (Minimum)	370 HP.
Tractor Hydraulics (Minimum)	2 SCVs; 2,320 System PSI.
Warranty	2-Year Limited (Industry Exclusive).
Width (Overall)	13’10”.
Length (Overall)	35’4″.
Height (Overall)	12’3″.
Weight (Empty)	25,400 Lbs.
Hitch Weight (Empty)	4,040 Lbs.
Hitch Weight (Loaded)	6,600 Lbs.

Condition	New
Model	1521 Dual-Auger Grain Cart

Features

Auger & Unloading

Clean Corner Dual Auger Design.
This layout gives you a clear line of sight to the combine spout.

Joystick Auger Control.
One joystick handles auger tilt, spout tip, horizontal auger, and flow gate.

Aligned Tip Spout.
A refined spout delivers smoother flow and more precise unloading.

Horizontal Auger Cleanout Doors.
Cleanout doors speed up crop changeovers between fields.

Undercarriage & Mobility

Tracks or Flotation Tires.
Choose dedicated high-flotation tracks or flotation tires to match your fields.

4.4% Yield Increase With Tracks.
An Ohio State study found tracked carts pay back their added cost within two years.

Low-Profile Short Side Design.
A shorter profile handles rolling terrain with ease.

Thickened Edge Auger Design.
Thicker auger edges extend wear life by 50 percent.

Technology & Serviceability

Scale-Tec POINT Scale Indicator.
This indicator pairs Bluetooth connectivity with ISOBUS compatibility for accurate
readouts.

Remote Scale Readout.
An optional readout lets the combine operator monitor weight in real time.

Central Grease Bank.
One grease bank lubricates every point from ground level.

Vented Grain Tank.
A vented tank improves airflow during loading and unloading.

Tool-Less Inspection Cover Access.
Open the inspection cover and cleanout without reaching for tools.

Hydraulic Hose Cradle.
Color-coded hose ends and a cradle simplify tractor hookup.